Are you looking for a special product from our range? If so, this is where you will find it!
With single injection head for 24 Needles
Included:
-24 pcs of 4 mm standard needle
-Working width: 300 mm
Power: 200-240V/50/60Hz
Wiberg part #84-2092
With single injection head for 50 needles
Robust design completely made of stainless steel and food licensed plastics.
Working width: 350 mm
1 set of 50 standard needle 4 mm
Power: 220V 60Hz
Wiberg part #84-2071
With single injection head for 24 Needles
Included:
-24 pcs of 4 mm standard needle
-Working width: 300 mm
Power: 200-240V/50/60Hz
Wiberg part #84-2078
With single injection head for 24 Needles
Included:
-24 pcs of 4 mm standard needle
-Working width: 300 mm
Power: 200-240V/50/60Hz
Wiberg part #84-2079
WITH SINGLE INJECTION HEAD FOR 108 NEEDLES
-575V60 Hz
-108 pcs of 4 mm standard needle
-1 pc dry operation (flow sensor)
-1 pc Siemens Touch panel mounted on the left side of the injector
-1 pc of inline filter mounted on the left side of the injector
Wiberg part #84-2075
With single injection head for 50 needles
Robust design completely made of stainless steel and food licensed plastics.
Working width: 350 mm
1 set of 50 standard needle 4 mm
Power: 220V 60Hz
Wiberg part #84-2067
With double injection head for 110 needles
Robust design completely made of stainless steel and food licensed plastics.
Working width: 450mm
2 sets of 110 standard needle 4 mm
Power: 575V 60Hz
Wiberg part #84-2068
Double needle head injector with stainless steel mesh conveyor, New generation controller ISC-B5, Variable Speed Pump. Requires 220V/3/60 Hz power.
Wiberg part #86-2023
Factory-reconditioned brine injector with 50 needles (double-needles), may also be equipped with single needles, quad needles, or combination needles/steaker knives. Equipped with variable speed centrifugal pump. Requires 220V, 3-phase.
Wiberg part #86-2012
Single head, 20 needles
3 ph; 240V; 5A; 1.5 Hp
Wiberg part #87-3546
with sensitive fins and silencer
power: 440-480V 60 Hz
volume: 2100
Wiberg part #84-2088
500 lb volume
Power require 230v 3pH 30 amp
Wiberg part #87-3582
Volume 250 Litre; frequency controlled rotational speed, ranging from 3 to 20 RPM; tumbling arm and mixing arm are individually adapted for different products; stepless, electromechanically adaptable working angle; equipped with a stationary lid swiveling device; discharge height suitable for norm wagon(200 litre); tumbler parameters can be adjusted by the user friendly SIEMENS touch panel and also programmable;
95% vacuum; power 220V/3/60Hz.
Wiberg part #84-2073
Volume:1500 litre; no. of revolutions: infinite variable; min. 2.0 revolutions/minute; max: 10.0 revolutions/minute; with Siemens Touch panel KTP 700, SPS S7 mounted on a control arm at the right side of the tumbler; power 440-480V 60Hz; included electrical box turned 90°
Wiberg part #84-2077
Volume 4000 Litre; sturdy construction with precision drum; direct drive for the drum; frequency controlled rotational speed, ranging from 0.5 to 10 RPM; special fins for controlled turning, slide and glide movements; tumbler parameters can be adjusted the user friendly SIEMENS touch panel and are also programmable; vacuum brine suction device for extra brine and additives; 95% vacuum; power : 575V 60Hz
Wiberg part #84-2074
Volume 2100 litre; no of revolutions: infinite variable; min. 2.0 revolutions/minute; max: 10.0 revolutions/minute; with Siemens Touch panel KTP 700, SPS S7 mounted on a control arm at the right side of the tumbler; power 440-480V 60Hz; included electrical box turned 90°
Wiberg part #84-2076
Built in 2020. Volume: 20 litre; filling volume: 1 – 12 lit. total; mixing motor: 110V/1pH/60Hz; stainless steel drum with baffles in EASY CLEAN design; product contact parts made of food grade plastic or stainless steel; machine frame polished all over; electronic interval switch with running-rest and total time, with 10 programs installed in a stainless steel box on the machine; vacuum pump integrated inside the frame; Best connect vacuum connection; BEST clean condensate absorber with see through tank for an easy check; weight: 25 kg
Wiberg part #87-2153
20 litre; Filling Volume: 1-12 litre total; mixing motor: 110V, 60Hz; stainless steel drum
with baffles in easy clean design; product contact parts made of food grade plastic or stainless
steel; machine frame polished all over; electronic interval switch with running, rest, and total time, with 10 programs installed in as stainless steel box on the machine; Vacuum pump intergrated inside the frame. Best connect vacuum connection; best clean condensate absorber with see through tank for an easy check
Wiberg part #87-2128
Volume 1500 Litre; no. of revolutions : infinite variable; min. 2.0 revolutions/minute; max: 10.0 revolutions/minute; power 575V 60 Hz
Wiberg part #84-2063
power requires 220 Volt amp 7.5 pH 1 Hz 60
Wiberg part #87-3590
TYPE B4000
4000 Litre; no. of revolutions: infinitely variable; min:0.5 revolutions/minute; max: 10.0/minute; power: 575V 60Hz; including 1 pc of cooling box;
Wiberg part #84-2061
TYPE B4000
4000 Litre; no. of revolutions: infinitely variable; min:0.5 revolutions/minute; max: 10.0/minute; power: 575V 60Hz; including 1 pc of cooling box;
Wiberg part #84-2060
Volume 2100 Litre; no. of revolutions : infinite variable; min. 2.0 revolutions/minute; max: 10.0 revolutions/minute; power 575V 60 Hz
Controller is on the right hand side.
Wiberg part #84-2069
Volume 2100 Litre; no. of revolutions : infinite variable; min. 2.0 revolutions/minute; max: 10.0 revolutions/minute; power 575V 60 Hz
Wiberg part #84-2064
Built in 2020. Volume: 50 litre; filling volume: 1-30 litre total; mixing motor: 110V/1pH/60Hz; frequency converter for the mixing motor speed adjustable from 4 to 40 U/min; stainless steel drum with baffles in EASY CLEAN design; product contact parts made of food grade plastic or stainless steel; machine frame polished all over; electronic interval switch with running-rest and total time, with 10 programs installed in a stainless steel box on the machine; vacuum pump integrated inside the frame; Best connect vacuum connection; BEST clean condensate absorber with see through tank for an easy check; weight: 38 kg
Wiberg part #87-2156
Built in 2020. Volume: 20 litre; filling volume: 1 – 12 lit. total; mixing motor: 110V/1pH/60Hz; stainless steel drum with baffles in EASY CLEAN design; product contact parts made of food grade plastic or stainless steel; machine frame polished all over; electronic interval switch with running-rest and total time, with 10 programs installed in a stainless steel box on the machine; vacuum pump integrated inside the frame; Best connect vacuum connection; BEST clean condensate absorber with see through tank for an easy check; weight: 25 kg
Wiberg part #87-2155
Built in 2020. Volume: 20 litre; filling volume: 1 – 12 lit. total; mixing motor: 110V/1pH/60Hz; stainless steel drum with baffles in EASY CLEAN design; product contact parts made of food grade plastic or stainless steel; machine frame polished all over; electronic interval switch with running-rest and total time, with 10 programs installed in a stainless steel box on the machine; vacuum pump integrated inside the frame; Best connect vacuum connection; BEST clean condensate absorber with see through tank for an easy check; weight: 25 kg
Wiberg part #87-2154
Vacuum tumbler, 1400-litre volume, capacity approx. 560 kg/1235 lbs, with integrated vacuum pump and fully self -contained glycol cooling system. Requires 420-440V/3/60 Hz power, 30 amps.
Tumbler Dimensions:
Length – 11’-6” (3505 mm)
width – 4’-6” plus 12” for control panel (1372 mm plus 305 mm for control panel)
Height – 7’-1” (2160 mm) maximum height at lid swing arm.
Weight – 4000 lbs (plus 500 lbs for pallets)
Wiberg part #84-2000
Portable tumbling system, with tumbling bed on wheels, and one 180-litre drum with wheels and lid. Tumbling capacity up to approx. 120 kg. Separate controls and vacuum pump. Requires 420-440V/3/60 Hz power (transformer optional).
Wiberg part #87-3011
With fixed chute and swiveling lifting element; power : 575V 60 Hz; made completely of stainless steel; hydraulic tube with stainless steel coupling aggregate: 1.1 kW;
Wiberg part #84-2066
MOVEABLE FOR VACUUM TUMBLER TYPE B1-B5
With fixed chute and swiveling lifting element; power: 575V 60Hz;
Wiberg part #84-2062
With fixed chute and swiveling lifting element; power : 575V 60 Hz; made completely of stainless steel; hydraulic tube with stainless steel coupling aggregate: 1.1 kW;
Wiberg part # 84-2065
1300 Liter loading capacity, comes with Inject Star Magnum vacuum loading lid.
Wiberg part #86-2018
Wiberg part #87-3025